AutoChimp™ Reverse Camera Kit for Toyota Prado 150 Series GX & GXL (2020–2024) | 9-Inch Factory Screen

AutoChimp™ Reverse Camera Kit for Toyota Prado 150 Series GX & GXL (2020–2024) | 9-Inch Factory Screen

SKU: AC-TOY-RC13

Replace or relocate the rear camera on your Toyota LandCruiser Prado 150 Series while keeping the matching factory screen. This kit supplies an AutoChimp Pro camera, a new camera-cable run and the correct factory-screen video adapter for the system described below.

Fits: Australian-delivered Prado 150 GX and GXL with the 9-inch CarPlay-generation factory screen and conventional factory reverse camera. Uses the matching 30-pin video / 28-pin control architecture.

Which Prado stereo do I have?

Match your factory stereo and camera connector before choosing a kit. Changeover years contain different systems, so the year range alone does not determine fitment.

This listing: 9-inch factory touchscreen with wired Apple CarPlay / Android Auto.

Key Features

• Retains the matching factory screen.
• AutoChimp Pro camera, attached 1m lead and 7m power/video cable included.
• Matching 24-pin or 30-pin video adapter, as specified for this listing.
• Universal camera mounting kit included; select a suitable installation location.

How It Works

The supplied camera and cable replace or relocate the rear-camera run into the matching factory video input. The vehicle must already have a working conventional factory-camera system and reverse-trigger path. Confirm a suitable mounting location; this is a new camera-and-cable installation.

1. Identify the matching factory screen and camera input.
2. Mount the camera using suitable hardware and route the supplied 7m cable.
3. Connect through the listed factory-screen adapter, with the correct camera supply and existing reverse signal.
4. Set the camera to matched CVBS / NTSC output and check orientation, guidelines and reverse operation before final assembly.

Compatibility

Australian-delivered Prado 150 GX and GXL with the 9-inch CarPlay-generation factory screen and conventional factory reverse camera. Uses the matching 30-pin video / 28-pin control architecture.

Not compatible with VX, Kakadu, factory PVM / Multi-Terrain Monitor / 360° camera systems, earlier 7-inch / 8-inch screens or Prado 250.

Existing camera system required: this listing covers rear-camera replacement or relocation. A vehicle without the required camera input, camera supply or reverse-trigger path needs separate confirmation before ordering.

What’s Included

• 1x AC-CABLE-TIES — Cable ties
• 1x AC-PRO-MOUNTING — Universal Pro camera mounting kit
• 1x AC-PRO-CAM — AutoChimp Pro camera with attached 1m lead, 7m power/video cable and basic mounting hardware
• 1x AC-TOY-30PIN — 30-pin factory-camera video adapter
• 1x AC-CONDUIT — Split conduit
• 1x AC-WATERPROOF-TAPE-PIECE — Waterproof tape piece

Technical Specifications

Optional Accessories

Additional Pro extension cable and alternative mounting hardware where required.

For fitment help, send a photo of the factory stereo, camera connector and intended switch or camera mounting location.