AutoChimp™ Quad Camera Interface Kit for Suzuki Jimny / Jimny XL (2025-Onwards) | Plug & Play

Four camera inputs through your Suzuki factory screen

SKU: AC-QUAD-JIMNY-2025

Keep the reverse camera already working on your supported Suzuki screen and add up to three selectable camera views. This Quad Camera Interface Kit includes the matched vehicle harness, module, two dual-button switches and four camera-power leads. Cameras and mounts are sold separately.

Compatibility

For Suzuki Jimny / Jimny XL, 2025 onwards, with the supported newer factory touchscreen and matching 24-pin power, 5-pin camera and 12-pin reverse connector family shown in the images. Match the screen and rear connectors before ordering. Earlier touchscreen systems require AC-QUAD-HRN-SUZUKI-2015 instead. Original non-display radios cannot show camera video.

A working reverse camera is required first. It may be the original factory camera, an existing compatible aftermarket camera or an AutoChimp reverse camera already displaying on the supported screen. If no camera is fitted, install a compatible reverse-camera kit before adding this expansion kit. Factory panoramic / 360° camera systems are not supported.

How It Works

The vehicle harness and RCA breakout route the cameras through the factory reverse-camera input. CAM 1 retains the reverse camera; CAM 2, CAM 3 and CAM 4 accept the cameras you add. The module displays one selected view at a time, and reverse gear retains automatic reverse-camera operation.

What’s Included

• 1× Newer Suzuki vehicle T-harness (AC-QUAD-HRN-SUZUKI-2025)
• 1× Reverse-camera RCA video breakout (AC-QUAD-BRKOUT-RCA)
• 1× QuadCam module (AC-QUAD-CAM)
• 1× Module mounting tape (AC-QUAD-CAM-TAPE)
• 1× 32 mm CAM 1 / CAM 2 dual-button switch, blue (AC-SW-32-D-CAM1-2-B)
• 1× 32 mm CAM 3 / CAM 4 dual-button switch, blue (AC-SW-32-D-CAM3-4-B)
• 4× Camera-power leads (AC-JST-2PIN-M)
• 2× 0.5 m green-to-green switch extensions; one per switch

No cameras, camera mounts or SnapLock joiners are included.

Included Switches

One 32 mm CAM 1 / CAM 2 dual switch and one 32 mm CAM 3 / CAM 4 dual switch are included, with one 0.5 m extension for each. The dual switches connect directly to the matching green harness plugs; no splitter or FRONT / REAR adapter is required for these included controls. Optional single-button switches require the standard AC-SWITCH-SPLITTER.

The RCA breakout and first 0.5 m switch extension listed above are already included in the complete vehicle harness pack. They are supplied once. A second 0.5 m extension is added separately for the second switch.

Video and Camera Power

QuadCam passes CVBS or AHD video through unchanged; the camera format must match the connected screen. It does not convert AHD to CVBS. The retained reverse camera keeps its original vehicle power supply, whether 6V or 12V. The module supplies switched 12V camera power, up to 2A on the selected channel, with one output active at a time.

Add Your Cameras

Select compatible front, trailer, caravan, side or underbody cameras and suitable mounts. AutoChimp Pro Series cameras connect through AC-PRO-CAM-RCA-YELLOW; Heavy Duty cameras use AC-HEAVY-CAM-RCA. Match every camera’s video format to the screen. Test each selected input and the original reverse view before refitting trim. Use the installation steps on this page.