AutoChimp™ Front Camera Kit for Suzuki Jimny (2018–2024) | Plug & Play Factory Integration
Delivery Info
Ships From: Melbourne, Australia
Dispatch Days: Daily (Monday - Friday)
Carrier: Auspost
Current Handling Times: 24 Hours
Front camera integration for the Suzuki Jimny
SKU: AC-FRONT-JIMNY-2018
Add a selectable front-camera view to your Jimny’s supported factory touchscreen while retaining its existing reverse camera. This complete front-camera kit includes the Pro Series camera, dedicated Jimny number-plate housing, earlier Suzuki vehicle harness and QuadCam interface.
Compatibility
For Suzuki Jimny, 2018–2024, fitted with the supported earlier touchscreen and matching 20-pin / 5-pin connector family shown in the images. Check the actual stereo, especially on early vehicles and vehicles with a replacement screen. The supplied housing suits the original Jimny front bumper and matching number-plate mounting points; altered bumpers and bullbars need a different mounting solution. This housing does not establish Vitara or Grand Vitara mount fitment.
A working reverse camera is required first. It may be the original factory camera, an existing compatible aftermarket camera or an AutoChimp reverse camera already displaying on the supported screen. If no camera is fitted, install a compatible reverse-camera kit before adding this expansion kit. Factory panoramic / 360° camera systems are not supported.
How It Works
The vehicle harness and RCA breakout connect inline behind the screen. QuadCam switches the original camera input between the retained reverse camera and the supplied front camera. The FRONT / REAR switch connects through AC-SWITCH-FR-ADAPTER so the labels select the corresponding views. The existing reverse trigger retains automatic reverse-camera operation. One image displays at a time.
What’s Included
- 1× Earlier Suzuki vehicle T-harness (AC-QUAD-HRN-SUZUKI-2015)
- 1× Reverse-camera RCA video breakout (AC-QUAD-BRKOUT-RCA)
- 1× QuadCam module (AC-QUAD-CAM)
- 1× Module mounting tape (AC-QUAD-CAM-TAPE)
- 1× Pro Series camera with attached 1 m lead and 7 m power/video cable (AC-PRO-CAM)
- 1× Pro camera RCA video/power adapter (AC-PRO-CAM-RCA-YELLOW)
- 1× Jimny front camera housing with body tape; uses camera screws (AC-MOUNT-SUZUKI-FRONTCAM)
- 1× 32 mm FRONT / REAR dual-button switch (AC-SW-SUZUKI-FRONT-REAR)
- 1× Required FRONT / REAR switch adapter (AC-SWITCH-FR-ADAPTER)
- 1× 0.5 m green-to-green switch extension; included with vehicle harness
The camera housing replaces the universal AC-PRO-MOUNTING bracket. Body tape is included; secure the camera with its own screws and refit the number plate using the original vehicle mounting screws. No separate housing screws or SnapLock joiners are supplied. Installation accessories include cable ties, conduit, tape, loom tool and camera setup information.
The RCA breakout and first 0.5 m switch extension listed above are already included in the complete vehicle harness pack. They are supplied once.
Video and Camera Power
QuadCam passes CVBS or AHD video through unchanged; the camera format must match the connected screen. It does not convert AHD to CVBS. The retained reverse camera keeps its original vehicle power supply, whether 6V or 12V. The module supplies switched 12V camera power, up to 2A on the selected channel, with one output active at a time.
Installation
Check the stereo connectors and existing reverse view. Fit the camera into the housing, prepare the body-tape surface and position it above the number plate. Route the cable clear of heat and moving parts, connect the harness, breakout, module and camera adapter, then fit the switch extension, adapter and FRONT / REAR switch. Set the camera to the required front-view orientation and screen-compatible video format. Test front selection and reverse operation before refitting trim. Follow the installation steps on this page.